Question: Are M10 And 3/8 The Same?

What size bolt is between m8 and m10?

Thread Conversion TableMetric CoarseMetric FineUNCM8 x 1.25M8 x 15/16-18M10 x 1.5M10 x 1.253/8-16M12 x 1.75M12 x 1.251/2-13M14 x 2M14 x 1.59/16-1212 more rows.

What is an m10 thread?

For example, an M10x1. 5 (coarse) thread has a 1.5mm pitch, while an M10x1. 25 (fine) thread has a 1.25mm pitch. … For example, the thread “M10” automatically means a coarse pitch, while any added pitch callout, such as M10x1. 25, specifies a non-coarse pitch.

Is a 3/8 socket the same as a 10mm?

The equivalent imperial size of a 10mm socket is a 3/8 socket.

Whats bigger 3/8 or 10mm?

8mm = 5/16 inch. 9mm = almost 3/8 inch. 10mm = just over 3/8 inch. 11mm = almost 7/16 inch.

What are standard bolt sizes?

US Standard Thread Length for BoltsBolt DiameterStandard Thread Length (in.) *Bolts 6 inches and shorterBolts longer than 6 inches5/16″7/8″1-1/8″3/8″1″1-1/4″7/16″1-1/8″1-3/8″7 more rows

What pitch is a standard m10 thread?

Basic Metric Thread Chart (M1 – M100)DiameterCoarse PitchFine Thread PitchesM71M81.25M91.25M101.50.7541 more rows

What is equivalent to a 10mm socket?

Standard / Metric Wrench Conversion ChartBolt DiameterStandardMetric1/8″5/16″8mm3/16″3/8″10mm1/4″7/16″11mm5/16″1/2″13mm39 more rows•Aug 26, 2019

How can you tell if a bolt is metric?

The metric screw thread is identified by the capital letter M, followed by the nominal diameter. Metric threads are measured by the distance between two adjacent threads in millimeters (pitch). Threads on a standard (inch based) fastener are measured by counting the number of threads per inch.

What size is an m10 bolt?

Metric Hex Bolt DimensionsNOMINAL SIZE (D)BODY DIAMETERm1010.009.78m1212.0011.73m1414.0013.73m1616.0015.7313 more rows

Is m8 the same as 8mm?

All dimensions of the bolt (and nut) are a parameter of its basic diameter. The “M8” refers to an approximation of the major diameter of the thread of 8mm – actually slightly less, like 7.9, as the sharp edges are rounded off.

What size is a 3/8 bolt in metric?

Fastener Conversion ChartInch EquivalentMetric Size-PitchISO and IFI Rec.1/4- 201/4- 28M6x 15/16-185/16- 24M8x 1.253/8-163/8- 24M10x 1.57/16-147/16- 20M12x 1.7513 more rows

What does m8 mean in metric?

M8-1.0 x 20. Here’s what the description means… M = Metric thread designation. 8 = Nominal diameter, in millimeters. 1.0 = Pitch (distance from thread to thread), in millimeters.

What does m14x1 5 mean?

M14x1. 5 means the threaded part is 14mm diameter, 1.5 is the pitch of the thread ie the distance between thread peaks.

Are 10mm and 3/8 the same?

It’s the same size. 3/8 is in inch and and its 10mm.

What is m10 in MM?

Tap sizeBasic major dia (mm)Basic major dia (inch)M8 x 18mm.3150M10 x 1.510mm.3937M10 x 1.2510mm.3937M12 x 1.7512mm.472424 more rows

What is the next size up from 3/8 drill bit?

Drill Bit Hole DiametersMetric SizeFractional Size15 mm.59063/816 mm.629925/6417 mm.669313/3277 more rows

How many mm is 9 16?

Conversion Table inches to mmDimensions — Inches to Metric0.438”7/16”11.13 mm0.500”1/2”12.70 mm0.563”9/16”14.30 mm0.625”5/8”15.88 mm21 more rows