- How do you clean glassware with chromic acid?
- Why is it important that damaged glassware not be used?
- How do you handle glassware safely?
- How do you dry glassware?
- How do you clean glassware?
- Why Acetone is used for cleaning glassware?
- What should you do if you cut yourself in the lab?
- How clean does a piece of glassware have to be before you can place it on the dirty glass cart?
- Why should you tell your teacher if any equipment or glassware is broken?
- Why do we notify the instructor about broken or cracked glassware?
- When should glassware be washed?
- How do you sterilize lab glassware?
- How do you clean cloudy glassware?
- Can glassware be heated before it is completely dried?
- Why should you not use glassware that you know is not totally clean?
- What are signs of dirty glassware?
- How do you clean volumetric glassware?
- When heating glassware you should?
How do you clean glassware with chromic acid?
Chromic acid is a commonly used glassware cleaning reagent.
It is prepared in a one liter container by dissolving 60 grams of potassium dichromate in approximately 150 mls of warm distilled water and then slowly adding concentrated sulfuric acid to produce a total volume of one liter Chromic Acid solution..
Why is it important that damaged glassware not be used?
with a graduated pipette with a frosted band. why should you not use damaged glassware? cheap,low resistance to heat and chemicals, often used to make disposable containers.
How do you handle glassware safely?
Always use two hands carrying any glassware (position one hand under the glass for support). Appropriate glove should be worn whe there is a risk of breakage (e.g. inserting a glass rod), chemical contamination, or thermal hazard. When handling hot or cold glassware, always wear insulated gloves.
How do you dry glassware?
Drying Glassware If glassware is to be used immediately after washing and must be dry, rinse it two to three times with acetone. This will remove any water and will evaporate quickly. While it’s not a great idea to blow air into glassware to dry it, sometimes you can apply a vacuum to evaporate the solvent.
How do you clean glassware?
The most common procedure that will be effective against most dirty glassware will be to first rinse with an organic solvent, and then second, to wash and scrub with warm, soapy water. Then the glassware needs to be rinsed with tap water, deionized water, and finally with acetone before placing on a rack to air dry.
Why Acetone is used for cleaning glassware?
Acetone is a really good nonpolar solvent and will wipe away any grease, oil, makeup, fats, sap, etc. It also evaporates quickly so it’s also used to remove water off glassware since water weight (even if you can’t see the water) can skew the results.
What should you do if you cut yourself in the lab?
Give it to your lab instructor or dispose of it as directed in a broken glass disposal container. If you cut yourself, immediately inform your lab instructor.
How clean does a piece of glassware have to be before you can place it on the dirty glass cart?
To minimize chances for breakage in transport, carts should not be overfilled and large cylinders should not be placed on the top shelf of the cart. Dirty glassware should be rinsed out and soaking in mild detergent or bleach.
Why should you tell your teacher if any equipment or glassware is broken?
Communication with your teacher in the laboratory can also help prevent accidents or injuries to yourself and others. For example, you should always tell your teacher if you spill something or are cut or injured when performing an experiment. You should also alert your teacher if any equipment or glassware is broken.
Why do we notify the instructor about broken or cracked glassware?
If any substance gets in your eyes, notify your instructor immediately and flush your eyes with running water for at least 15 minutes. Glassware safety, Check the condition of glassware before and after using it. Inform your teacher of any broken, chipped, or cracked glassware because it should not be used.
When should glassware be washed?
Glassware Cleaners The water should be hot. For glassware that is exceptionally dirty, a cleaning powder with a mild abrasive action will give more satisfactory results. The abrasive should not scratch the glass. During the washing, all parts of the glassware should be thoroughly scrubbed with a brush.
How do you sterilize lab glassware?
Wash with hot soapy water, rinse thoroughly with tap water, then rinse 3-4 times with deionized water. Be sure the final rinses sheet off of the glass. Burets need to be thoroughly clean to be used for quantitative lab work. In some cases, you may need to soak the glassware overnight in soapy water.
How do you clean cloudy glassware?
You can remove the buildup caused by calcium and magnesium ions in hard water by swabbing the glass with acetone (nail polish remover), and then scrub gently with a mild detergent. Soaking the glasses in plain white distilled vinegar for 15 minutes is another effective home remedy.
Can glassware be heated before it is completely dried?
Glass is easier to clean immediately after use than after it has dried dirty! You rarely need to dry glassware. If you must dry the inside of a flask, warm it gently over a Bunsen burner. Do not heat volumetric glassware (it will break if you do).
Why should you not use glassware that you know is not totally clean?
Put glassware in water if you can not clean it immediately otherwise the residue will stick to the labware and it would get difficult to remove it. For washing the glass labware, make use of soap, detergent, or cleaning powder.
What are signs of dirty glassware?
Common signs of dirty glassware include bubbles adhering to the inside of a glass (in the liquid portion of the beer), poor foam formation or head retention, and a lack of lacing on the inside of the glass as the beer is consumed.
How do you clean volumetric glassware?
Clean pipets and volumetric flasks using warm soapy water. The glassware may require scrubbing with a brush. Rinse with tap water followed by three to four rinses with deionized water.
When heating glassware you should?
Glassware should be vented when heating to avoid overpressurization and possible explosion. Keep stoppers loose when autoclaving or during procedures that require heating. All containers should be labeled to clearly indicate their contents. This includes glass and plastic reagent bottles and test tubes.