Quick Answer: Can I Install Two Different Brands Of RAM?

Can I use all 4 RAM slots?

A common misconception about RAM is that you can put any RAM into any slot.

You can do that, but it won’t work, or it will work ineffectively.

If you have four RAM slots, always buy matched pairs of RAM (two sticks from the same company, same speed, and same capacity) for the best results..

Can I use 1333mhz and 1600mhz RAM together?

Well, yes DDR3 1600 is compatible with DDR3 1333 MHz. But using them together both will have same speed.

Can I combine 4gb and 8gb RAM?

IE you can either use the 4GB RAM or the 8GB RAM but not both at the same time. Usually you can but it depends on the motherboard. There are chips which are 4GB and 8GB, in dual channel mode this will not work. … Sometimes you will have to swap the RAM slots since the detection has bugs.

Why does my 1600mhz RAM shows 1333mhz?

You do have to enable XMP profile in BIOS to get 1600 MHz. 1333 is the default and every RAM set rated for that speed or faster will default to 1333. Go to the overclocking section of your BIOS and poke around for RAM timing and there should be an option for enable XMP. Just save and boot into windows to check it.

What is the difference between 1333mhz and 1600mhz RAM?

Hello. There is really no performance difference between running the RAM at 1333MHz compared to 1600MHz. The reason to buy 1600MHz is if you are heavily OCing. When you OC the CPU (unless you’ve got an unlocked multi like the 955) you also change the frequency the RAM.

Does dual channel RAM have to be the same?

For two different size RAM sticks to perform optimally together, they need to use the same voltage and their respective controllers should play well with each other and the motherboard. That’s why it’s best to use the same model in all slots. However, this doesn’t mean you can’t use different size RAM sticks together.

Is 32gb RAM overkill?

Is 32GB overkill? In general, yes. The only real reason an average user would need 32GB is for future proofing. As far as just simply gaming goes, 16GB is plenty, and really, you can get by just fine with 8GB.

Is 1600mhz RAM good?

In general it is good enough and it actually is the fastest kind of memory supported on locked Intel motherboards before socket 1151. Though if you have a Z87/Z97 motherboard and unlocked K cpu, then getting memory faster than 1600MHz can be beneficial.

Can I use 2 4gb and 2 8gb RAM together?

IE you can either use the 4GB RAM or the 8GB RAM but not both at the same time. Usually you can but it depends on the motherboard. There are chips which are 4GB and 8GB, in dual channel mode this will not work. … IE you can either use the 4GB RAM or the 8GB RAM but not both at the same time.

Can 1600mhz ram work on 1066?

Yes , but RAM speed will be only 1333mhz at max if it is only the one stick being used . … both RAMs will run at same speed. If ur first RAM is operating at max 1066mhz then no matter what ,your new RAM will also run at 1066 And the rest of the story anyone can understand of course.

Is it better to have one 8gb or two 4gb?

If your motherboard has 4 slots for RAM, two 4GB sticks is better because you can already have dual channel, meaning faster memory. … If your motherboard only has 2 slots for memory, and you want to upgrade in the near future, get the 8GB stick.

Can I use 2 Rams with different speeds?

You can use memory modules of different speeds as long as they are faster than those specified for your computer. It is recommended to use modules of the same speed as those already installed in your system. If you do mix speeds, the modules will all run at the speed of your slowest modules.

Is 1600MHz ram slow?

Yes DDR3 1600 will bottleneck a Skylake CPU. You really want DDR4 3000 or faster to truly take advantage of what the CPU is capable of. However, not everything will be affected by the lower RAM speed. If gaming is your focus then there are only a few game engines that perform significantly better with faster RAM.

Is higher frequency RAM better?

RAM frequency is measured in MHz and usually immediately follows the DDR version in the RAM spec. … This is why though higher frequency RAM is technically faster, that additional speed often does not translate into better actual real world performance.

Is it OK to mix Ram brands?

It is advisable to use RAM sticks by the same manufacturer, of the same size, and of the same frequency. … However, this doesn’t mean you can’t use different size RAM sticks together. For example, if your first stick is 4GB, you can still add a new 8GB stick.

Can I install RAM with different frequency?

You can’t add RAM of different sizes (frequencies/models/etc.) … If you install two RAM sticks of different frequencies, both of them will be working on the lowest frequency. So, if you Installed one stick with 1600Mhz and other with 2400Mhz, the latter will work on 1600Mhz, thus lowering its efficiency.

Do all 4 sticks of RAM have to be the same?

You can even mix sticks although not recommended and a higher chance for the ram not playing nice together. Do all 4 sticks of RAM have to be the same? Yes, it is advisable to use RAM sticks by the same manufacturer, of the same size, and of the same frequency.

Is ddr3 still good in 2020?

Yes, it is good enough, however most motherboards these days use DDR4 ram. But if you still have a decent enough intel cpu and 16 gb of ddr3 ram you should be fine. If you have an amd fx cpu like the 8350 etc, then it is time for an upgrade. So on one hand it is enough on the other, most pc’s in 2020 will use ddr4 ram.

How do I know if my RAM is 1333 or 1600?

Clearly, you can see my ram is 1600 mhz from the name. BUT standard setting for all DDR3 sticks is 1333 which is JDEC standard. This is the default setting that most motherboards are set to as long as your Ram can atleast support 1333mhz. You’d need to overclock your bios to get 1600 mhz.