What If I Have Two Black Wires?

What happens if you wire a light backwards?

The fixture still works if you reverse the wires, but the socket sleeve will be hot, and anyone who touches it while changing a bulb can get a shock.

When wired correctly, the socket sleeve is neutral and only the small metal tab at the base of the socket is hot..

What happens if you reverse hot and neutral wires?

This happens when the hot and neutral wires get flipped around at an outlet, or upstream from an outlet. Reversed polarity creates a potential shock hazard, but it’s usually an easy repair. … This wire is commonly referred to as the neutral wire, and it should always be white.

Why does my outlet have 2 hot wires?

The reason for multiple hot/neutral wires for one outlet is that the outlets are daisy-chained together. This means hot/neutral is only coming from one of the wires and it is being sent to the other wire.

Why are both white and black wires hot?

like the title says both wires (black and white get or turn hot). To answer your question, Yes, that is correct. The reason you are getting 120 volts when the fan/light is on is because the voltage is feeding trough the motor or the light bulb (or both).

What happens if you connect 2 hot wires?

You either have no voltage difference between the two wires, or you will get hot wires from opposite hot legs and you will end up with a 240 volt dead short. In that case you will trip at least one circuit breaker, or possibly 2. … If you bring two hots to the switch from the same phase, nothing will happen.

Can Reverse polarity cause a fire?

Watch out: Reversed polarity on an electrical outlet is dangerous. If you accidentally reverse these wires the device you plug in to the receptacle may “work” but it is unsafe and risks a short circuit, shock, or fire.

Does it matter which wire goes where on a lamp?

The threaded socket is the neutral. … Remember when repairing lamps, the neutral wire in the lamp cord is marked (usually with a rib or ribs) and it connects to the wide blade of the plug at one end and to the neutral screw (usually silver but may have some other identification) at the other end.

What happens if you connect wires wrong?

If you connect wrong wires in high voltage or high amount of current carrying appliances,then you have 99% to get short circuit and the components inside may get blowed, and you may notice smoke sometimes this may cause fire and also burst.

Is black positive or negative?

There are also positive and negative cables in the jumper cable set. The red one is positive (+), the black one is negative (-). Never connect the red cable to the negative battery terminal or a vehicle with a dead battery.

Is black wire hot or neutral?

Black, Red and Blue are used for hot wires and White is used as the neutral wire in a 120/208 V circuit. Brown, Orange and Yellow are used as hot wires and gray is used as the neutral wire in a 277/480 V. For grounding, regardless of the voltage, Green (or a bare wire) is used.

Why does my light switch have 2 black wires?

The bare or green-wrapped ground wires serve as a backup to divert the power safely away in case of an electrical fault. In most cases, two black wires will be attached to the switch’s two terminal screws. … The ground wires will be connected to each other and attached to the grounding screw on the switch.

Which wire is positive when both are black?

If the multi-colored wire is black and red, the black wire is the negative wire, while the red one is positive. If both wires are black but one has a white stripe, the striped wire is negative, while the plain black wire is positive. Look in the owner manual to determine which wires are negative in a car.

How do you wire a plug with two black wires?

You must make a black pigtail (short wire), connect the two existing black wires together with the black pigtail using the proper size wire nut and then connect the black pigtail to the proper side of the outlet (dark screw). Do the same with the white wires connecting the white pigtail to the silver screw.

Should both black wires be hot?

If it’s 120 volts between the two black wires…. You most likely have a hot and a neutral. Now check voltage between each black wire to ground. Hot to ground will show 120 volts, Neutral to ground should show zero (or close to zero – in a large building it’s not uncommon to have a few volts between ground and neutral).

Why would a white wire be hot?

This enables current to flow through the light bulb and power it. If the neutral is disconnected anywhere between the light bulb and the panel, then the neutral from the light to the point of the break in the neutral will become hot (and the device will be unpowered, because no current will be flowing through it).

Is the black wire positive or negative?

Positive – The wire for the positive current is red. Negative – The wire for the negative current is black. Ground – The ground wire (if present) will be white or grey.

Why do I have 2 black wires and 2 white wires?

If there is power in both the up and down position of your light switch, than that is the hot power. If the light was fed power first than here is how you connect the wires. Take your black (hot all the time wire) and marrett it onto the white of the opposite cable (that brings hot power down to your switch).

Can a neutral wire be hot?

Measuring hot-to-neutral voltage by itself doesn’t tell you if those wires are reversed. You must measure neutral-to-ground or hot-to-ground voltage. If the neutral-to-ground is 120V and the hot-to-ground is a few volts or less, then the hot and neutral wires are reversed (Fig.

How do you determine which wire is hot and which is neutral?

Identify the neutral wire in the fixture by looking at the wires. In most modern fixtures the neutral wire will be white and the hot wire is red or black. In some types of fixtures, both wires will be the same color. In this case, the neutral wire is always identified by some means.

What happens if you reverse black and white wires?

If your outlet’s polarity is reversed, it means that the neutral wire is connected to where the hot wire is supposed to be. This may not sound like a terrible thing, but it is. There is always electricity flowing out of an outlet with reversed polarity, even if an appliance is supposed to be off.